I attempted the pendulum movement exercise again, however this time it was created within Maya. This was a good opportunity to fix the mistakes that I mentioned in my analysis of my stop motion version of this exercise. The main issue I had with the stop motion was that I felt the final few swings were a little bit too quick, which I feel like I have definitely improved on in this version, as due to how easy it is to time and measure specific movements in Maya, I was able to make each swing take the same amount of time to complete it's movement, and have the swings accurately decrease in scale as the number of swings increases, which I feel makes for a much more realistic representation of a pendulum movement. As I mentioned during the evaluation of my stop motion pendulum movement, I didn't follow my bar sheet, however this time the animation follows the movement a lot more precisely, the only difference being that I've added a few more swings at the end, which goes to show how much bar sheets can assist your animations. In conclusion, I found this version of the animation a lot easier to produce, however I feel as though after making this animation, I'd have a much better idea of how to make the movement a lot more realistic in the stop motion room, due to what I have learned during the making of the Maya version of this exercise.
Thursday, 27 October 2016
https://vimeo.com/189224988
This is my forth experimentation in the stop motion room. Instead
of focusing on a single animation principal, for this one I incorporated what I
learned from all of the previous animations into creating a pendulum movement.
The main principal that I had to take into consideration was the ‘Slow in, Slow
out’ principal, as that was essential for giving the movement a lot more of a
realistic feel in terms of physics. The slow in and out was emphasised even
more in this animation, in order to really emphasise the swing. The only issue
I have with the final product, is the fact that the final few swings I feel are
a little bit too quick, as in reality the swings may take a longer amount of
time, but I feel as though the mistake is subtle enough to not be instantly recognisable,
however if I ever need to incorporate a pendulum animation again (not only via
stop motion), I will take this into account. I feel as though the main reason for me not fully succeeding in this experiment, is the fact that I didn't follow my bar sheet accurately, and instead only utilised it as a base to understand the motion. I produced this bar sheet digitally to get a more accurate diagram.
Thursday, 20 October 2016
My Maya spaceship exercise. This exercise was set to introduce us to all the different kinds of motions and speeds that we can produce within Maya, relating back to the 'Slow in, slow out' and 'timing' animation principals. Each spaceship takes the same amount of time to come to a stop as eachother, however due to the altered paths from Maya's graph editor, they all seem to be going at different speeds, and each say something different about the spaceship. The top spaceship shows a simple 'Slow in, slow out' motion, and is possibly the most natural movement of the three, and would most likely be used in normal animation for someone walking at a normal pace or a sliding object. The second spaceship shows a constant speed from start to finish, which is hardly ever seen in real life, as due to the laws of momentum, an object would have to have some form of a build up and a slow down when in motion, so this speed would be best used for when you're not focused on capturing realism, such as in 'motion graphics'. The final spaceship has a similar motion to the first spaceship, however the is a much larger build up, and it takes a lot longer to reach its top speed, making the slow down a lot more abrupt, this type of motion would be best used in instances such as; a person quickly running, a fast car, or a falling object. Though I wasn't really challenged much in this exercise, it has caused me to grow a lot more familiar with the graph editor, and I think I have gained a better understanding of when to use certain motions.
This is my bar sheet for the following animation. Due to the slightly increased complexity of the animation principal that I will be dealing with, this was the first time that I saw the true importance of a bar sheet, and despite the fact that the final product doesn't exactly follow the plan, this still proved very helpful.
https://vimeo.com/188069156
This is my third experimentation in the stop motion room. This
time I am considering rule 2# of the 12 principals of animation, which is known
as ‘Anticipation’. This was used to prepare the audience for an action
therefore making the action appear more realistic. This was shown in my
animation by having the block move and tilt backwards before the main, much
quicker motion occurs. Rule 5# was also taken into account within this
animation, this rule is known as ‘Follow through and overlapping action’, and means
that certain parts of the moving object should keep moving after it has come to
a stop before being pulled back to the desired stop. This is also shown in my animation, as the
block tilts forward after stopping, and then wobbles backwards. I feel that I
pulled of the effect well, and I think that I have given the block a lot more
character and life through the animation. On my previous animation, I stated in
my evaluation that I wish I had made the starting movements a lot more subtle,
therefore making the slow in more evident, which I feel as though I have
improved in this version, as when the block takes off and even in the anticipation
itself, the slow in is a lot more subtle, but not so much so that it becomes unnoticeable.
Wednesday, 19 October 2016
Intro to Creative Play - Week 3
My team's tower, which was made for the purpose of supporting an egg without it falling and also being as tall as possible, and made using only very basic materials. There were many different ideas coming from each of our team members, most of which were all combined within the final product, thus showing how many creative minds can come together to produce better outcomes, as our tower held the egg successfully and was also the highest, therefore winning.
The previous task was created for us to introduce us to 'Rapid Prototyping', which is where a range of techniques are used to quickly produce a product. For the second task, we were tasked to take what we learned from the previous task (which in my case was to combine all our best ideas) and apply it to a task which allowed a lot more planning, preparing and creating. Above are the sketches which we made when coming up with ideas for how to make an egg safely land from a three story drop (our task).
This was my main contribution to the ideas generating stage. I had an idea to keep the egg suspended via elastic bands inside a box, therefore preventing it from making impact with the ground as the box hits it. However, we decided to leave this idea as we didn't think the box would be sustainable. Unfortunately, another team had the same idea and went through with it right up to the production and building stages, and it succeeded with protecting the egg.
This was our backup idea, where the egg (stylised as Spiderman) was simply lowered down via a string, as there was nothing strictly in the rules which went against that. Despite the almost 'cheating' approach, it was dropped to early and the egg was smashed.
Above is the drop which the eggs had to endure and the aftermath on the idea that we settled on (the initial sketches of which can be seen further up), which involved many cones inside one another in hopes of absorbing the impact. However, perhaps due to the fact that not all of our teams contributions were considered, the final product was not successful, however at least managed to contain most of the spillage.
Tuesday, 18 October 2016
'Making of' - Week 3
![]() |
| My second 'Making of' map |
The way in which I accomplished this, was to treat it as a comic strip with a narrative, therefore still identifying key aspects of the journey portrayed, but also guiding the observer through the area. This was again produced digitally, however there was more sketching beforehand to decide on how the design will be laid out. As for the characters in the comic, I decided to do focus on two characters from a very modern and contemporary cartoon, therefore linking them to Media City. These two characters were Rick and Morty from 'Rick and Morty', and I tried to incorporate their characters from the show into their personalities and dialogue portrayed within the comic, as well as references to the show, such as the statue of Pudsy in Media City resembling a character from the show known as 'Mr. Meeseeks'.
![]() |
| (From left to right) Pudsey statue as seen at Media City, Mr. Meeseeks from 'Rick and Morty', and my interpretation of Pudsey in the Rick and Morty style |
This is a lot less cryptic and symbolic than my previous map, and is instead a lot more representational, using clearly recognisable locations and objects. All the characters were based from their orignial designs, but redrawn by me in each panel in the desired pose. I am again pleased with the final look, as the premise gave me freedom to add humour and charm to the map, however I feel as though I should attempt to move away from digital design in order to broaden my abilities. It was interesting to attempt to make a comic strip, as although they are something that I am interested in, I haven't recently made any of my own, so even though the medium may be the same, the style, context and platform are vastly different from this one to the previous one. However, if I had to choose which of my designs I prefer, I would say the first one, as I admire the simplicity and the fact that it is my own style as appose to me imitating another designers style. I would like to experiment further with comic strip design, but with my own characters and style.
After a discussion with a classmate, I was made aware of the fact the the backgrounds in my comic can seen rather dull at times, and as I am meant to be clearly documenting key areas of Media City, this causes a huge problem. It is also unlike the style of Rick and Morty, where there is a lot of time and consideration put into the backgrounds and locations. Next time, I will assure to put as much effort into the characters as I do to their surroundings, like I did with the 'BBC' building, as I feel that is a fairly decent rendition.
Since starting these tasks, I have noticed a link to between the concept of 'making of' and these 'mapping' exercises, as in a typical 'making of' video, the journey of production is attempting to be communicated, such as a map attempts to communicate a journey from point A to point B. This has made me think that perhaps such as with these simplistic maps, maybe there are also many ways in which a 'making of' documentary can be presented, as they both aim to do similar things.
Sunday, 16 October 2016
Animation Context - Week 3
Image Association
Image Association
In 'Animation Context' we were focusing on 'learning how to learn', the notes from which, I have included below -
We were also tasked to associate four different images of craft-related items with a Film, Musician and an Animation, and explain the reasoning of the choice. I enjoyed this task as it got me thinking about the many different ways that an inanimate object could relate to other things, and as most of the forms of media that I choose I have a strong opinion on (Both positive and negative), this list is quite personal.
![]() |
| The sheet that we were given |
Feathers
Animation - South Park
Both can make you laugh historically (in the feathers case, being tickeled by one, in South Park's, through its humour), however it may be irritating depending on the context (In South Park's case, a controversial episode, in the Feathers, continuous tickling.)
Musician - Christina Perri
Majestic, calming and relaxing
Film - Forrest Gump
Sticky Notes
Animation - Simpsons
There's loads of them, and can be easily forgotten about (In Simpson's case, watching the newer episodes, and in Sticky Note's, simply screwing up the note and disposing of it.)
Musician - Nicki Manaj
Mainly used with the main concern being look and aesthetic as appose to usefulness.
Film - This is England
Glitter
Animation - Don't Hug Me I'm Scared
Harmless fun to begin with, but quickly takes a turn for the worse (In DHMIS's case, the subject matter of the short, and in Glitter's case, it will start appearing everywhere and become annoying.)
Musician - Kesha
Again, obvious reasons
Film - Minions
Entertains kids, but for adults they can't escape them after exposing them to their kids. There's also a lot of them and they're tiny.
![]() |
| Don't Hug Me I'm Scared |
Pipe Cleaners
Animation - Rick and Morty
Both have a slightly rough style
Musician - PSY
Like pipe's, PSY used to be very popular, but now he is never or rarely seen.
Film - Green Mile
Subscribe to:
Posts (Atom)









